您(Are)是否厌倦了通过双击或双击来打开Windows中的文件和文件夹？(Windows)您想像在智能手机上一样通过点击或轻敲打开它们吗？如果您更改Windows中的特定设置，您可以这样做。在本指南中，我们分享了五种方法，您可以通过单击使鼠标双击。让我们开始吧：

注意：在本指南中，我们将介绍在(NOTE:)Windows 10和Windows 7中单击鼠标双击。当一种方法仅适用于一个版本的Windows时，我们会相应地突出显示它。

鼠标单击在Windows中的工作原理(Windows)

默认情况下，无论您使用的是Windows 10 还是旧版本的Windows，您都可以通过双击打开文件和文件夹。(open files and folders)但是，您可以更改此行为以通过单击打开文件（鼠标双击单击）。如果您将 Windows 配置为以这种方式工作并将鼠标光标(mouse cursor)悬停在文件或文件夹上，则其指针将变为手形符号。如果您单击或点击此文件或文件夹，Windows会立即打开它。

文件夹也是如此：如果您将鼠标指针悬停在文件夹上，该文件夹会带有下划线，并且指针会变成手形符号。同样(Again)，单击或轻击可打开文件夹。

如果您想在Windows(Windows)中启用鼠标单击，请继续阅读本文。

1. 如何在Windows 10中设置(Windows 10)文件资源管理器(File Explorer)以单击打开文件和文件夹

如果您使用 Windows 10，只需单击即可打开文件和文件夹，而不必双击它们，请首先打开文件资源管理器(open File Explorer)。在文件资源管理器(File Explorer)中，选择功能区上的查看(View)选项卡。然后，单击右上角的选项(Options)按钮。

这将打开一个名为“文件夹选项(Folder Options)”的窗口。在其中，坚持常规(General)选项卡，转到“单击项目如下”("Click items as follows")部分，然后选择“单击打开项目（指向选择）”。("Single-click to open an item (point to select).")然后，要应用此设置，请单击OK。

现在，Windows 10 只需单击即可打开文件和文件夹，而不是双击。

2. 如何设置Windows 10和 Windows 7 以单击打开文件和文件夹，使用搜索

还有另一个选项可以将鼠标双击变为单击，该选项适用于所有Windows版本。虽然您必须启用与本教程上一部分中相同的设置，但在此方法中，您可以通过使用搜索打开“文件夹选项(Folder Options)”窗口来完成。

在Windows 10中，使用任务栏上“(Windows 10)开始(Start)”按钮附近的搜索框来查找“文件夹选项”。("folder options.")然后，单击或点击“文件资源管理器选项”("File Explorer Options")结果。

在 Windows 7 中，打开“开始”菜单(Start Menu)并搜索“文件夹选项”。("folder options.")然后，单击“文件夹选项(Folder Options)”结果。

在任一操作系统中，在“文件夹选项(Folder Options)”窗口中，转到“单击以下项目”("Click items as follows")部分并启用“单击以打开项目（指向选择）”("Single-click to open an item (point to select)")设置。要应用您的设置，请单击或点击确定(OK)。

从现在开始，您在Windows(Windows)中所做的所有单击都将被视为双击。

3.如何使用控制面板(Control Panel)让Windows一键打开文件和文件夹，而不是双击

此方法也适用于所有版本的Windows，它涉及使用控制面板(Control Panel)。打开控制面板(Open the Control Panel)并导航到“外观和个性化”。("Appearance and Personalization.")

在外观和个性化(Appearance and Personalization)设置列表中，单击或点击文件资源管理器选项(File Explorer Options.)下的“指定单击或双击打开” 。("Specify single- or double-click to open")

文件夹选项(Folder Options)窗口打开。在这里，转到“单击以下项目”("Click items as follows")部分并启用“单击打开项目（指向选择）”("Single-click to open an item (point to select)")选项。要应用您的更改，请单击或点击确定(OK)。

现在，您只需单击鼠标即可打开文件和文件夹。

4. 如何在Windows 7中启用从(Windows 7)Windows 资源管理器(Windows Explorer)单击鼠标双击

如果您使用的是 Windows 7，请打开Windows Explorer。在其中，单击“组织(Organize)”并在显示的菜单中选择“文件夹和搜索选项” 。("Folder and search options")

文件夹选项(Folder Options)窗口打开。在这里，转到“单击以下项目”("Click items as follows")部分并选择“单击以打开项目（指向选择）”选项。("Single-click to open an item (point to select).")要应用此设置，请单击或点击确定(OK)。

从现在开始，打开文件和文件夹时鼠标双击。

5.如何使用PowerShell或命令提示符(Command Prompt)（cmd）单击使Windows 10双击(Windows 10)

在Windows(Windows)中将双击更改为单击鼠标的另一种（稍微复杂一点）方法是更改​​一些注册表(Registry)二进制数据值。您可以使用PowerShell或Command Prompt轻松完成此操作。打开您喜欢的命令行环境并依次运行以下命令：

REG ADD "HKCUSOFTWAREMicrosoftWindowsCurrentVersionExplorer" /V IconUnderline /T REG_DWORD /D 2 /F

和

REG ADD "HKCUSOFTWAREMicrosoftWindowsCurrentVersionExplorer" /V ShellState /T REG_BINARY /D 240000001ea8000000000000000000000000000001000000130000000000000062000000 /F

然后，重新启动您的 Windows 10 计算机。您应该看到，现在您可以单击打开文件和文件夹，而不必双击它们。

如何还原此更改并通过双击打开内容

如果在某些时候，您想回到通过双击打开文件和文件夹的默认行为，请按照与之前相同的步骤进行操作。但是，最后在“文件夹选项(Folder Options)”窗口中选择“双击打开一个项目（单击选择）” 。("Double-click to open an item (single click to select)")要应用此设置，请不要忘记按OK按钮。

如果您更喜欢使用文本命令而不是Windows的图形界面，请打开PowerShell或命令提示符(Command Prompt)，运行以下命令，然后重新启动 PC：

REG ADD "HKCUSOFTWAREMicrosoftWindowsCurrentVersionExplorer" /V ShellState /T REG_BINARY /D 240000003ea8000000000000000000000000000001000000130000000000000062000000 /F

无论哪种方式，Windows现在都恢复到使用双击而不是单击打开文件和文件夹的默认设置。

您知道更改此设置的其他方法吗？

这些是我们所知道的设置Windows以单击而不是双击打开文件和文件夹的方式。如果您认识其他人，请不要犹豫，在下面的评论中分享他们。此外，如果您有任何问题或疑问，请随时与我们联系。

5 ways to double-click with a single click in Windows

Are yоu tired of opening files and folders in Windows bу double-clicking or double-tapping on them? Dо you want to open them like you do on your smartphone, with a click or a tap? You can do that if you change a particular setting in Windows. Іn this guide, we shаre five ways in which you can make your mouse dоuble click on a single click. Let's get started:

NOTE: In this guide, we're covering mouse double-clicking on a single click in Windows 10, as well as in Windows 7. When a method works only in one version of Windows, we highlight it accordingly.

How the mouse single-click works in Windows

By default, regardless of whether you use Windows 10 or an older version of Windows, you can open files and folders by double-clicking on them. However, you can change this behior to open files with a single click (mouse double-clicking on a single click). If you configure Windows to work this way and hover the mouse cursor over a file or folder, its pointer turns into a hand symbol. If you single click or tap on this file or folder, Windows instantly opens it.

The same with folders: if you hover the mouse pointer over a folder, the folder gets underlined, and the pointer turns into a hand symbol. Again, a click or a tap opens the folder.

If you want to enable mouse single-click in Windows, continue reading this article.

1. How to set File Explorer to open files and folders with a single click in Windows 10

If you use Windows 10, to open files and folders with a single click instead of hing to double click on them, first open File Explorer. In File Explorer, select the View tab on the ribbon. Then, click the Options button from the top right side.

This opens a window called Folder Options. In it, stick to the General tab, go to the "Click items as follows" section, and choose "Single-click to open an item (point to select)." Then, to apply this setting, click on OK.

Now, Windows 10 opens files and folders with a single click instead of a double click.

2. How to set Windows 10 and Windows 7 to open files and folders with a single click, using search

There's also another option to turn mouse double clicks into single clicks, which works in all Windows versions. While you he to enable the same setting as in the previous section of this tutorial, in this method, you can do it by opening the Folder Options window using search.

In Windows 10, use the search box on the taskbar, near the Start button, to look for "folder options." Then, click or tap on the "File Explorer Options" result.

In Windows 7, open the Start Menu and search for "folder options." Then, click on the Folder Options result.

In either operating system, in the Folder Options window, go to the "Click items as follows" section and enable the "Single-click to open an item (point to select)" setting. To apply your setting, click or tap OK.

From now on, all the single clicks you make in Windows are treated as double clicks.

3. How to use Control Panel to make Windows open files and folders with a single click instead of double-clicking

This method, too, works in all versions of Windows, and it involves using the Control Panel. Open the Control Panel and nigate to "Appearance and Personalization."

In the list of Appearance and Personalization settings, click or tap on "Specify single- or double-click to open" under File Explorer Options.

The Folder Options window opens. Here, go to the "Click items as follows" section and enable the "Single-click to open an item (point to select)" option. To apply your change, click or tap OK.

Now you can open both files and folders with a single mouse click.

4. How to enable mouse double-clicks on single click from Windows Explorer, in Windows 7

If you are using Windows 7, open Windows Explorer. In it, click on Organize and select "Folder and search options" in the menu that's displayed.

The Folder Options window opens. Here, go to the "Click items as follows" section and choose the option that says "Single-click to open an item (point to select)." To apply this setting, click or tap OK.

From now on, the mouse double clicks on a single click when opening files and folders.

5. How to make Windows 10 double click with a single click using PowerShell or Command Prompt (cmd)

Another (a bit more complicated) method to change double clicks into single clicks on your mouse in Windows is to change some Registry binary data values. You can easily do it using either PowerShell or Command Prompt. Open the command-line environment that you prefer and run the following commands, one after the other:

REG ADD "HKCUSOFTWAREMicrosoftWindowsCurrentVersionExplorer" /V IconUnderline /T REG_DWORD /D 2 /F

and

REG ADD "HKCUSOFTWAREMicrosoftWindowsCurrentVersionExplorer" /V ShellState /T REG_BINARY /D 240000001ea8000000000000000000000000000001000000130000000000000062000000 /F

Then, reboot your Windows 10 computer. You should see that now you can single click to open files and folders instead of hing to double click on them.

How to revert this change and open things with double clicks

If, at some point, you want to go back to the default behior of opening files and folders with a double click, follow the same steps as earlier. However, in the end, choose "Double-click to open an item (single click to select)" in the Folder Options window. To apply this setting, don't forget to press the OK button.

If you prefer to use text commands instead of the graphical interface from Windows, open PowerShell or Command Prompt, run the following command, and then reboot your PC:

REG ADD "HKCUSOFTWAREMicrosoftWindowsCurrentVersionExplorer" /V ShellState /T REG_BINARY /D 240000003ea8000000000000000000000000000001000000130000000000000062000000 /F

Either way, Windows now goes back to its default setting of opening files and folders using double clicks instead of single clicks.

Do you know other methods for changing this setting?

These are the ways we are aware of setting Windows to open files and folders with a single click instead of a double click. If you know others, do not hesitate to share them below in a comment. Also, if you he issues or questions, feel free to get in touch.